Fiberglass repair at PS door

[D Stand]

Noticed a crack in the fiberglass today. Looking for advise on repairing it. My first thought is that I have to cut out the broken glass on the back side and build it back up with new. Any suggestions and recommendations of best products from the experts would be appreciated.

Thanks Dale

[GoDadGo]

You're going to need to do a little homework before you begin so with that said, check out your reading assignment for this evening:

https://thefactoryfiveforum.com/show...light=visqueen

Please feel free to reach out to me if I can be of any assistance to you.

https://www.youtube.com/watch?v=6UK6K2jcwTU

I sent you a P.M. with my contact information.

[j.miller]

After your repair keep in mind that that is the weakest spot on an FFR. If you pick the body up from the nose and tail so the body sags in the middle that spot is under compression and has no problem. If you reverse the situation and lift from the sides letting the nose and tail sag it takes very little to cause that exact crack. I have fix maybe 15 in the past 20 years...da Bat

[D Stand]

Thanks for the information / advise. I am lifting front and back with the center brace in, but I did by this as a used kit and who knows how the previous owner moved it around. I will order up some supplies for the repair.