I have the following parts and tools left over from my build.
1. Aluminum Coolant Neck
* Used on a 351W
* Has about 15,000 miles on it. Seals well. Could use a little bit of elbow grease depending how particular you are. * Cost: $10.00 plus shipping
SOLD
IMG_3792.jpgIMG_3793.jpgIMG_3794.jpgIMG_3797.jpg
2. Stainless steel remote oil filter/cooler lines, remote filter mount and Mocal oil thermostat
* Used on a 351W
* Used my remote oil cooler and filter for a short time when I first built the car.
* Hose length is long enough to reach from the block to the front cross member (I had my remote filter mounted off that cross member).
* Includes o-rings
* You need to supply the two oil lines that connect from the remote filter to the oil cooler (if you are running a cooler)
* I cannot now recall the thickness of these lines. They are not the thin lines that FFR supplied with their kit years ago. The braided stainless steel line measures 13/16" OD. I believe they are 10AN.
* I believe the parts as I am selling are the same as the brands I am linking below (know this for sure with the Mocal oil thermostat as it is stamped with the Mocal name on it). However, I am not certain on the Canton oil filter adapter.
* https://www.maperformance.com/produc...SABEgJJA_D_BwE - $75 new plus shipping new
* https://www.summitracing.com/parts/c...view/make/ford - $91.00 + shipping new
* Above does not include the value of the hoses and fittings.
3. 8.5" round air cleaner w/ K & N Filter
* This has never been used. Surface of air cleaner does have some minor scratches. I spent about 5 minutes polishing this up prior to the photo (FYI). The air filter is a K & N PN # A082A8.
Cost: $15.00 plus shipping
Last edited by accobra66; 12-05-2020 at 08:29 AM.
Reason: Updated parts available
Thanks: 
Likes: 
Reply With Quote