Front sway bar

[Edsnextproject]

Looking for a photo of bracket installation of the sway bar? I’m a little confused as to how bracket bolts in?
Thanks,
Ed

[Kiwi Dave]

Hi Ed

The OEM brackets don't fit well due to the angles of the tabs.

I went with these based on the recommendation of Scott (Octobersknight): https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1

Sway bar mounts.jpg

Cheers

Dave

[Shawn818c]

I used the rear brackets from a '08 LGT, they worked well. Does anyone know how long to trim down the end links to for a C on the street ride height? All the manual says is to cut them down as needed.

[sgarrett]

Here are pictures of mine. The first two are the drivers side:

Driver side sway mount 1.jpgDriver side sway mount 2.jpg

And here is the passenger side:

Passenger side sway mount 1.jpgPassenger side sway mount 2.jpg

I don't remember there being anything tricky about them. As far as cutting things, I didn't cut anything at all yet since I will wait intil I get all of the alignment done. Then I suspect I will just cut the ends of those rods so that the sway bar is horizontal when the car is sitting on its suspension.

[Edsnextproject]

I ordered OEM Subaru donuts and brackets. They fit well. Thanks for your I put!