Just do the bottoms first. Seal, paint, clear. Let them dry for two days. Prep the tops, mask the bottoms and start painting shooting the rest of the car. Sealer (wait 1 hour) , stripe color down the center (wait one hour), set hood and decklid in place and lay out stripes. Remove hood and decklid and finish taping edges and fully masking off stripes. NOW CALL IT A DAY ! 2nd day. You are going to need to do a little light sanding on the over spray (we should have another phone chat for that). Shoot body color, unmask stripes, shoot clearcoat.....