Quote Originally Posted by Al_C View Post
OK, last question on this topic: heating elements are installed in the seats. Element wires can exit the seat at the inside or the rear of the seat. I can place the wiring components directly behind the seat. Last part: run the wires through an opening in the transmission tunnel inside of the tunnel to the dash. Take a look at the photo:



The question is shall I run the wires through a hole forward or aft of the seat belt connection? I'm just trying to avoid any contention with other components. Thanks!
I ran mine about 2-1/2 to 3" forward of the seat belt tab. My switches are in the trans tunnel cover. I ran the power wires along the floor inside the passenger compartment and up behind the dash. With the carpet installed, everything is hidden except for the wires going into the tunnel, which with the seats installed are not seen.