Very Cool Parts

Visit our community sponsor

Thanks Thanks:  1
Likes Likes:  0
Results 1 to 3 of 3

Thread: SBF water line routing

  1. #1
    Senior Member FF33rod's Avatar
    Join Date
    Jun 2018
    Location
    North Vancouver, BC, Canada
    Posts
    1,554
    Post Thanks / Like

    SBF water line routing

    I'm sure most of you guys know this stuff since you were 2 years old. Want to make sure I understand where all the water cooling lines get connected on my 347 and where the temp gauge sensor goes.
    The 2 radiator connections are obvious. But the rest was a bit of a head scratcher. I've tried to indicate where I think things go on the following picture.
    Am I close?

    IMG_2676a.jpg

    Thanks
    Steve

  2. #2
    Senior Member KenWilkinson's Avatar
    Join Date
    Feb 2011
    Location
    Rotonda West Florida
    Posts
    326
    Post Thanks / Like
    Looks good to me. The Red line will have a thermostat housing with a hose nipple. YOu will need a visit to the local parts store for a ford 302 bypass hose. About 8 bucks. Don't use regular hose it will collapse. A molded piece is required. Since the thermostat housing is going to vary by your selection, expect to trim the hose to fit.

  3. Thanks FF33rod thanked for this post
  4. #3
    Senior Member FF33rod's Avatar
    Join Date
    Jun 2018
    Location
    North Vancouver, BC, Canada
    Posts
    1,554
    Post Thanks / Like
    Excellent, thanks for the help.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Martin's Dent and Collision Shop

Visit our community sponsor