Boig Motorsports

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: Clutch cable & Mounting Housing

  1. #1
    Senior Member
    Join Date
    Mar 2017
    Posts
    148
    Post Thanks / Like

    Clutch cable & Mounting Housing

    Hope this pic is visible. The cable mounting housing only has one screw to mount???
    This seems kind of flimsy. Is there any other part that's supposed to be used?




    IMG_0490.jpg

  2. #2
    Senior Member
    Join Date
    Oct 2012
    Location
    Tybee Island, GA
    Posts
    505
    Post Thanks / Like
    Your clutch quadrant will grab that metal end and hold the cable in place up against the forward DS footbox wall. I think I took that mount tab off my cable so it would fit in the adjuster that I purchased. See pic:

    2019-02-15_03-45-00 by D. R., on Flickr
    Dave
    Mk 3.1 - #6882 - 5.0L 302 - FiTech EFI - 3-Link - 3.08 Ratio - 15" Wheels
    Greenhorn and doing the best I can
    My photos are at: My Flickr acct
    Videos are at: YouTube Videos

  3. #3
    Senior Member
    Join Date
    Feb 2011
    Location
    Edmonton Alberta
    Posts
    795
    Post Thanks / Like
    That cable is like the one I have on my Coupe. No firewall adjuster and the part with the bolt hole just fits in the hole in the aluminum at the pedal box. Clutch adjustment is done at the clutch fork.
    David W
    Mkll 4874 built in 2004
    Gen 3 coupe #16 registered 2018 painted 2019

  4. #4
    Senior Member
    Join Date
    Mar 2017
    Posts
    148
    Post Thanks / Like
    Thanks for the help guys.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Martin's Dent and Collision Shop

Visit our community sponsor