Hope this pic is visible. The cable mounting housing only has one screw to mount???
This seems kind of flimsy. Is there any other part that's supposed to be used?
IMG_0490.jpg
Visit our community sponsor
Hope this pic is visible. The cable mounting housing only has one screw to mount???
This seems kind of flimsy. Is there any other part that's supposed to be used?
IMG_0490.jpg
Your clutch quadrant will grab that metal end and hold the cable in place up against the forward DS footbox wall. I think I took that mount tab off my cable so it would fit in the adjuster that I purchased. See pic:
2019-02-15_03-45-00 by D. R., on Flickr
Dave
Mk 3.1 - #6882 - 5.0L 302 - FiTech EFI - 3-Link - 3.08 Ratio - 15" Wheels
Greenhorn and doing the best I can
My photos are at: My Flickr acct
Videos are at: YouTube Videos
That cable is like the one I have on my Coupe. No firewall adjuster and the part with the bolt hole just fits in the hole in the aluminum at the pedal box. Clutch adjustment is done at the clutch fork.
David W
Mkll 4874 built in 2004
Gen 3 coupe #16 registered 2018 painted 2019