Visit our community sponsor
Thanks:
0
Likes:
0
-
Does anyone k ow if it’s possible to remove the factory immobilizer
I can bypass the immobilized but I’m having other issues like the driving lights don’t work. I have several other little issues that show up so I trying to eliminate the know issues one by one. How can I totally remove the immobilized from the system?
Thanks in advance for your help
Dedrick
Getting close to getting the required custom car inspection.
-
I did it very briefly.
What year is your car, and do you have the wiring diagram for it?
-
Mine is a 2007 Impreza 2.5i NA. I do have the wiring diagram
-
Senior Member
Originally Posted by
Dkelly
Mine is a 2007 Impreza 2.5i NA. I do have the wiring diagram
If I recall correctly, the 07NA does not have an immobilizer.
Bob
-
Originally Posted by
Bob_n_Cincy
If I recall correctly, the 07NA does not have an immobilizer.
Bob
You are correct. The NA models do not have an immobilizer for these years.
-
Well maybe I’m operating at a lack of knowledge but the ground fron the starter circuit runs through the ECU. When the security is triggered the ECU does not provide a ground to the starter circuit. I initially jumpered the connection path in the relay to complete that portion of the installation and test drives.
Now I have returned to this circuit as I’m working on removing all errors and hacks and returning the relays. I stripped away the wire coating on the ground side of the relay activation circuit. I then ran a ground to this connection. Removed the jumper and replaced the relay. If this is not an immobilizer then I’m looking for a way to reset the security so it no longer blocks the starter relay from energizing.
Thank for the help in clearing up what I need. Do you guys have any thought as to how to reset the security?
01100A04-77B6-4299-B17B-6788729A5460.jpeg
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor