Quote Originally Posted by hugo-k View Post
Hi folks!

I am almost ready for the carpet job! Reading all the comments here, I just wonder what is the way to do it.
According to FFR build manual, they recommed using glue.
In this thread, silicone, or adhesive basesd silicone type, are also beeing used.

Is the glue based siliocne easier to use, compared to FFR recommended glue?
Pretty much any adhesive you want to use is fine. There are all kinds of opinions about what is best based on whatever each person chose to use. I used 3M 77 spray adhesive and it worked just fine. Some use glue, others silicone. No matter what you use, if you ever need to pull a piece off, be prepared for the fibers to stay behind. I had to redo the door sill pieces as the ones that came in the kit didn't work well for me. When I pulled the pieces off, most of the fibers stayed behind. I ended up buying some heavy-duty carpet used to cover the supports on a boat trailer to redo the door sill pieces with. I also made some aluminum molding to address the corner where the raw edges come together.