Russ' Garage

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  3
Results 1 to 19 of 19

Thread: Bruces Chopped 35

  1. #1
    Member
    Join Date
    Nov 2018
    Location
    Scurry Texas
    Posts
    58
    Post Thanks / Like

    Bruces Chopped 35

    So FINALLY got my truck ordered Friday!

    Closest thing to what I am envisioning would be the Black Label truck with hood and without side panels. Plan to chop 2"-3". Will need to wait and measure to see whats feasible. Will do some mods to the hood to make it curve into the body and front shroud. Fill in the remaining indents for the side panels. Also thinking about re framing the rear window so it is flush mount like the windshield as opposed to the traditional porthole window. SBC 427 Stroker with 4L65E.

    Will post some pictures as I start cutting it up if I can figure out process.
    Can anyone point me to some instruction on the simplest method? I found some old postings but the method was pretty convoluted. Cant believe there isn't something more current that is a little easier?

    Cant wait to get started! I have a lot of body/paint and some metal fab experience but have never attempted to do something like this. Should be an interesting challenge! Glad to have this forum to fall back on for guidance Wish me luck!

  2. #2
    Member
    Join Date
    Aug 2018
    Location
    Hampshire, IL
    Posts
    70
    Post Thanks / Like
    Bruce, I too have extensive body and paint experience and wouldn’t attempt this. I’m 6’1” and it’s a tight squeeze as it is. I couldn’t go any tighter. If your dead set on doing this you might want to consider going a bit further and modify the foot box area for more room. The windshield would need to be cut down the rear would be ok with a chop just below it and the roll bar would need a chop as well but no big deal there. Lots of work for not much pay off for me . The truck looks aesthetically great IMO. Rob
    FFR 35 p/u # 0016 Dart 347 TKO 600

  3. #3
    Member
    Join Date
    Nov 2018
    Location
    Scurry Texas
    Posts
    58
    Post Thanks / Like
    Thanks for the input Rob. I'll just have to see when I get the kit and take some measurements. I'm just 5'7" 170lbs. Did some rendering with pictures of other trucks in a paint program and it really gives it a whole different look with just a few inches. Anyway the fun for me has always been to make things a little different and the challenge of figuring out how to do it!

  4. #4
    Member
    Join Date
    Nov 2018
    Location
    Scurry Texas
    Posts
    58
    Post Thanks / Like

    chopped 35

    Think I have the picture thing figured out. Before and after of what I'm thinking.
    Attached Images Attached Images

  5. Likes Houdini liked this post
  6. #5
    Member ztoolman44's Avatar
    Join Date
    Apr 2019
    Location
    Summerland, BC
    Posts
    38
    Post Thanks / Like
    Quote Originally Posted by bnelson View Post
    Think I have the picture thing figured out. Before and after of what I'm thinking.
    That does look better

  7. #6
    Member
    Join Date
    Nov 2018
    Location
    Scurry Texas
    Posts
    58
    Post Thanks / Like

    Wheels & tires

    Got my wheels painted and tires mounted. I went with US Wheels so called (ready to paint). If anyone thinking about these beware. I spent about 10 hours smoothing welds, filling pits, sanding and cleaning My girls picked this color for the bottom of truck. Told them I reserve the right to paint over it if it was to in your face. But have to say after putting paint on the wheels I'm kinda liking it. I made a blank white truck in paint and printed a bunch of them out so could play around with different colors. Lot of fun :

    wheels 2.jpgwheels.jpgpaint.jpg

  8. Likes GoDadGo liked this post
  9. #7
    Member ztoolman44's Avatar
    Join Date
    Apr 2019
    Location
    Summerland, BC
    Posts
    38
    Post Thanks / Like
    Diggin the smoothies

  10. #8
    Member
    Join Date
    Nov 2018
    Location
    Scurry Texas
    Posts
    58
    Post Thanks / Like
    I like them Look a lot better in real life.

  11. #9
    Junior Member
    Join Date
    Oct 2018
    Posts
    21
    Post Thanks / Like
    I was thinking of doing the smoothies also, painted red or some other accent color ytd. Thinking blue body with white stripe and then red wheels and powder coating chassis red. But like I said ytd, haven't ordered truck yet, might be a couple years till that but no harm in dreaming.

  12. #10
    Member
    Join Date
    Nov 2018
    Location
    Scurry Texas
    Posts
    58
    Post Thanks / Like
    Nope. Keep on dreaming! I Had been originally planing on the 33 and have been watching it for years. When I was finally in a position to pull the trigger this truck came out. Something different and cant wait to get it

  13. #11
    Member
    Join Date
    Nov 2018
    Location
    Scurry Texas
    Posts
    58
    Post Thanks / Like
    Well was planning on having suspension done and rolling over the three day weekend but Stewart truck broke down. Now saying 3-4 more weeks Spent extra time painting the new shop and putting in AC and TV. Shop dog waiting patiently...


    shop3.jpgshop4 (2).jpg

  14. Likes GoDadGo liked this post
  15. #12
    Senior Member
    Join Date
    Jan 2018
    Location
    Twin Cities, MN
    Posts
    176
    Post Thanks / Like
    Sounds like Stewart is still having issues. I went through the same thing at this exact time last year. Hang in there. Though I didn’t hang in there and chose to drive to Wareham from Minnesota.

  16. #13
    Member
    Join Date
    Sep 2013
    Posts
    51
    Post Thanks / Like
    Ugh. I was happier in ignorance land. Now I’m sad. My delivery date from FFR was Saturday.
    MkI.IV 2643k
    33 Gen II on deck

  17. #14
    Member
    Join Date
    Nov 2018
    Location
    Scurry Texas
    Posts
    58
    Post Thanks / Like
    Yea I was pretty bummed. I about got in my truck and drove up there but they said my 12ft flatbed wouldn't be big enough and said would not be ready till Wednesday to load. So would have had to rent tailor, drive 4200 miles and take four days off work Not really a choice. Sure wish there were some other options other than Stewart!

  18. #15
    Member
    Join Date
    May 2019
    Location
    ocean springs, ms
    Posts
    32
    Post Thanks / Like
    Quote Originally Posted by bnelson View Post
    Well was planning on having suspension done and rolling over the three day weekend but Stewart truck broke down. Now saying 3-4 more weeks Spent extra time painting the new shop and putting in AC and TV. Shop dog waiting patiently...


    shop3.jpgshop4 (2).jpg
    I got shop envy.

    ss

  19. #16
    Member
    Join Date
    Nov 2018
    Location
    Scurry Texas
    Posts
    58
    Post Thanks / Like
    Stewart says pick up on the 13th now. Ugh..... Got most of my engine parts in so could at least work on that. Made some wire looms out of 1/2 round. Have to look at them a while to see if I like them.


    Engine (P).jpgwire looms (P).jpgewire looms b (P).jpg

  20. #17
    Senior Member
    Join Date
    Nov 2017
    Location
    Placitas, NM
    Posts
    552
    Post Thanks / Like
    Shop and engine look great. While your waiting for Stewart epoxy the floor, so much easier to keep clean.
    '33 Hotrod, #1047, delivered on 2/27/18, go cart on 9/24/18.
    LS3 w/4L65e, Lokar shifter, Electric PS, Vintage AC/Heat/Def, 8.8" 3.55
    TorqThrust II Wheels w/Toyo Proxy T1 Sport Tires, F 245/45ZR17 R 295/35ZR18

  21. #18
    herb fraser's Avatar
    Join Date
    Feb 2011
    Posts
    340
    Post Thanks / Like
    Chevy, I am all for it !

  22. #19
    Member
    Join Date
    Nov 2018
    Location
    Scurry Texas
    Posts
    58
    Post Thanks / Like
    Well another weekend waiting. Got the floor epoxied and started building some cabinets and work benches. I'll finish up next weekend which hopefully will be the last one that its empty! Shop dog still waiting patiently. More than I can say for myself

    Shop Cabinets.jpg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Lodestone Billetworks

Visit our community sponsor