I am ready to mount my wheels and new tires. I have read and mulled over the best way to attach the spinners and caps.
I guess all the methods will do, but either the work involved or some short comings kept me looking for something else.
Well, here is what I came up with. I put the center in the wheel and secured it, with the spinner. On the back side, I wiped a bead of Permatex Ultra Grey. After letting it set up and removing the spinner the center is secure enough to not turn or fall loose. I will antiseize the spinners and retain them with the set screw. I am heeding the warning of the set screw messing up the threads on the cap and dropping a short length of weed eater line under the set screw. I saw this used on another item to protect the threads on an adjustment knob.
When I need to remove the center, I feel good about tapping it out with a dead blow hammer and or cutting the bead of RTV out of the wheel center.