Fitting for FFR Power Steering Rack

[mlewis]

All - Looking for some guidance on what fittings are needed for the hose connections to the FFR power steering rack.

Thanks

[johnnybgoode]

Mark at Breeze should be able to help you out. Looks like he sells a complete kit. Scott

https://www.breezeautomotive.com/sho...-steering-kit/

[jrcuz]

Give Mark at Breeze a call, he hooked me up with every thing I needed.
JR

[mlewis]

good tips.

thanks,

Mark

[phileas_fogg]

Another satisfied Breeze customer here. After a quick description of what I was trying to accomplish, Mark hooked me up with everything I needed.


John

[mlewis]

Just curious, what size hose are recommended for the lines that run to the rack AN6 ?

[Tacojoe]

For a Fox rack/OEM pump, i adapted to AN with some Russell fittings - they were aluminum and i though it might be kinda dicey given they could see 2000-3000 psi in the line but so far no problems. PNs i used with a fox rack...

RUS-648020 and 030 ($23 for both)

I then fab'ed one of the Russell powerflex hoses to feed the pressure line to the rack - worked great for me

[rich grsc]

For a Fox rack/OEM pump, i adapted to AN with some Russell fittings - they were aluminum and i though it might be kinda dicey given they could see 2000-3000 psi in the line but so far no problems. PNs i used with a fox rack...

RUS-648020 and 030 ($23 for both)

I then fab'ed one of the Russell powerflex hoses to feed the pressure line to the rack - worked great for me

Not sure where you got the pressure info from, but a Ford pump typically will run about 750psi, the pressure release valve is 1400-1500psi.

[mlewis]

So AN6 is the suggest hose size ?

[rich grsc]

AN6 is plenty big.