Very Cool Parts

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 6 of 6

Thread: Autometer gauges-coyote motor-oil temp hook up

  1. #1
    Senior Member
    Join Date
    May 2017
    Location
    Lake Mills, WI
    Posts
    205
    Post Thanks / Like

    Autometer gauges-coyote motor-oil temp hook up

    Hi Guys,
    I'm running autometer gauges(amps, fuel, oil temp, oil pressure and water temp) and a 2017 coyote motor.
    I have found where I hook up the oil pressure and water temp.
    the coyote manual says nothing about where to hook up the oil temp.


    Any input is appreciated

    Thank you
    Martin

  2. #2
    Senior Member BEAR-AvHistory's Avatar
    Join Date
    May 2015
    Location
    Raleigh NC, OIB NC
    Posts
    1,593
    Post Thanks / Like
    What oil pan do you have?
    Kevin
    MKIV #8234
    Coyote '14/TKO-600/3-Link 3:55 Rear
    I love the smell of 100 octane in the morning.
    NITTO NT01 275X40X17ZR - 315X35ZRX17
    Delivered 2/7/14 - Plate "COYOTE NC1965" 3/25/15

  3. #3
    Senior Member
    Join Date
    May 2017
    Location
    Lake Mills, WI
    Posts
    205
    Post Thanks / Like
    aluminum low profile moroso

    I think I just figured it out. use the same sending unit as the one for the water temp
    M

  4. #4
    Not a waxer Jeff Kleiner's Avatar
    Join Date
    Feb 2011
    Location
    Bloomington, Indiana
    Posts
    8,000
    Post Thanks / Like
    Quote Originally Posted by magicmarto View Post
    aluminum low profile moroso

    I think I just figured it out. use the same sending unit as the one for the water temp

    M
    No, that would just give you two gauges reading the water temperature. Does your pan have an unused bung? If so that's where you would put the sender for oil temp. If you are using a remote filter the adapter will often have a port that will accept a sender, or if not it could be drilled and tapped for one.

    Jeff

  5. #5
    Senior Member BEAR-AvHistory's Avatar
    Join Date
    May 2015
    Location
    Raleigh NC, OIB NC
    Posts
    1,593
    Post Thanks / Like
    Quote Originally Posted by magicmarto View Post
    aluminum low profile moroso

    I think I just figured it out. use the same sending unit as the one for the water temp
    M
    MOROSO pans have multiple bungs use one of them for the oil temperature sender.





    You many need an adapter to match the pans threads to the senders threads. Got mine at Home Depot. I just used the bung closest to the senders wire lead plug.
    Last edited by BEAR-AvHistory; 04-27-2019 at 04:28 PM.
    Kevin
    MKIV #8234
    Coyote '14/TKO-600/3-Link 3:55 Rear
    I love the smell of 100 octane in the morning.
    NITTO NT01 275X40X17ZR - 315X35ZRX17
    Delivered 2/7/14 - Plate "COYOTE NC1965" 3/25/15

  6. #6
    Senior Member
    Join Date
    May 2017
    Location
    Lake Mills, WI
    Posts
    205
    Post Thanks / Like
    yup
    Same pan as mine
    Will do
    Thanks guys
    Martin

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Breeze

Visit our community sponsor