Any good how to do info on the wiring harness figment for a Bluprint LS3 engine?
Visit our community sponsor
Any good how to do info on the wiring harness figment for a Bluprint LS3 engine?
I'm not sure about the Blue Print LS3. I bought mine from Chevrolet Performance but they can't be that different. Good luck finding a place to put everything. Eventually it all starts coming together. IMG_0005.JPGIMG_0051.JPG
33 Hot Rod (Gen 1) Stage 1 delivered on 4/27/2017, Stage 2 delivered on 9/21/2018
LS3 495hp/480 lb. ft., 4L70E, Electric PS, Classic Auto Air, Lokar electronic sport shifter, 13 inch Wilwood front and 11.68 Cobra rear brakes, Ford 8.8 w 3.73 w 4 link, Billet Specialty Legend Series MAG wheels and Mickey Thompson
Sportsman S/R 26x8x18 front and 29x18x20 rear tires.
I did away with as much of the plastic corrugated tubing as possible and then wrapped the wires with automotive cloth tape. In most cases it reduced the OD of the bundle by almost 50%. In some cases I shortened the wires, completely removed wires that aren't needed, or folded some to shorten them before taping them together.
See post 126.
https://thefactoryfiveforum.com/show...-s-Build/page4
'33 Hotrod, #1047 Gen 1, delivered on 2/27/18, go cart on 9/24/18.
LS3 w/Gearstar Level 3 4L65e Tranny, Yank converter, Lokar shifter, Electric PS, Vintage AC/Heat/Def, 8.8" 3.55
TorqThrust II Wheels w/Toyo Proxy T1 Sport Tires, F 235/45ZR17 R 295/35ZR18
Garage Built, Driveway Painted.