Boig Motorsports

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Rear Disc Conversion

  1. #1
    Senior Member bil1024's Avatar
    Join Date
    Feb 2011
    Location
    NY
    Posts
    1,422
    Post Thanks / Like

    Rear Disc Conversion

    So converting stock 90 mustang rear to disc. I have to order the ranger axles, but already have the T bird calipers and brackets and just need to get the rotors, anyone happen to know the size ?

  2. #2
    Senior Member Big Blocker's Avatar
    Join Date
    Feb 2011
    Location
    Lost Wages, Nevada
    Posts
    634
    Post Thanks / Like
    There are several rotor sizes available, depending on your fronts. The popular "upgrade" for earlier cars was: 13" up front and 11.63" in the rears (using T-Bird single piston calipers).

    Doc
    Last edited by Big Blocker; 05-18-2019 at 08:33 AM.
    FFR3712K (MKII) in Lost Wages Nevada.
    5.0 w/tubular GT-40 EFI, E303 cam, Custom 4 into 4 headers, T5, 3-Link 3.73 rear. Full F5 tubular suspension. Drop Butt mod, Dash forward mod, custom foot box air vents, custom turn signal system. 13" PBR brakes, Fiero E-Brake mod, Flaming River 18:1 rack w/ F5 bump steer kit on Breeze bushings. 17" Chrome Cobra "R's" w/ 275 fronts and 315 rears. MKIV seats. FORD Royal Blue w/ Arctic White stripes.

  3. #3
    Senior Member johnnybgoode's Avatar
    Join Date
    Mar 2011
    Location
    Ottawa Ontario
    Posts
    254
    Post Thanks / Like
    https://www.breezeautomotive.com/sho...8-turbo-coupe/ I'm running these with the 45MM TC rear calipers. They're about the largest stock rear caliper you can get and work quite well with the EBC Green Stuff pads. Scott

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Brown County Customs

Visit our community sponsor