My sway bar is too long it doesn’t fit inside if the spindle bracket.
Thanks ahead of time
Visit our community sponsor
My sway bar is too long it doesn’t fit inside if the spindle bracket.
Thanks ahead of time
A few others have posted that aftermarket rear (818 front) bars won't fit. What I recall is they are about an 1 inch + too wide.
Building a bar isn't that tough if you want to take it on.
Here is the rate calculator I used when building mine. http://www.gtsparkplugs.com/Sway-Bar-Calculator.html
I was able to use the FFR links (Cut down) and some of the hardware. The rest I got from Merlin Racing https://www.merlinmotorsport.co.uk/s...nts-and-spares
Beware the sway bar mounts on the chassis are not the same height. Not a big deal the pads are big enough to raise the low side to level the bar.