Hi everyone, I was one of the builders who installed the Coyote in my MKIV. At that time I used the fuel lines supplied by Factory Five as part of the Complete kit. I've had very few, if any issues, but once in a while if I'm running hard (Drag race style) it does feel like I may be starving the Coyote of fuel. Again, only something that has happened a couple of times.
I've now started by build of a Coupe, and will be installing either a Gen 2 or Gen 3 Coyote. I think I've seen that most guys are now using larger supply lines then come with the complete kits. Is that a correct assumption? Could I get some feedback on what sizes are working best?
I've also seen some articles regarding a single line that somehow handles the return line requirements as well. I haven't dug into that so don't really understand how that would work, or if that is acceptable. I'll do some more search but wondering what this group has learned through experience.
Finally, I've no issue with bending lines, and see little downside to the hard lines, but I'm starting to see that more guys are using the flexible fuel lines. I'd be curious as to the experience and benefit of these as well.
Thank you in advance for the input.