Very Cool Parts

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: MK4 Upper Control Arm Clevis location

  1. #1
    Member
    Join Date
    Jun 2015
    Posts
    50
    Post Thanks / Like

    Cool MK4 Upper Control Arm Clevis location

    MK4 Upper Control Arm clevis question - My picture is taken from the passenger side. I have the UCA installed with the clevis toward the front. I took the drivers side apart as I thought it was wrong. Holding it up together, you can see that when I reinstall the DS one, the clevis will be toward the rear.

    Is this correct? Do I have a wrong part from FFR?

    I don't want to get farther on the front end until I get this figured out.

    I have this all apart as I switched from Mustang spindles to the FFR ones.

    Thanks for any help and advice you can give me.


    Phoenixmsb

    20190611_200619.jpg

  2. #2
    Not a waxer Jeff Kleiner's Avatar
    Join Date
    Feb 2011
    Location
    Bloomington, Indiana
    Posts
    4,235
    Post Thanks / Like
    There is not a left and right arm; both are alike so as you discovered one will have the clevis to the front and the other to the rear. I assume that you are aware that when changing from Mustang spindles to the FFR ones the UCA will need to be installed using the side mounts rather than the top ones.

    Jeff

  3. #3
    Member
    Join Date
    Jun 2015
    Posts
    50
    Post Thanks / Like
    Jeff,

    Thank you so much for your help! I've moved the arms to the other holes and purchased new bolts and nuts from FFR as I didn't want to trust reusing the old ones after being torqued already.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Martin's Dent and Collision Shop

Visit our community sponsor