Need an upper A-arm threaded collar!

[Hobby Racer]

Hello everyone, I was shorting the aluminum threaded collars that connect the front upper A-arms to the frame to get more camber in the front suspension of my MK3.1 roadster, and well I shortened one too much!

I was wondering if anyone has a spare / extra one I can purchase? Or if you know of a supplier I can get one from. FFR does not sell them individually, only as part of the whole A-arm assembly.

5/8 fine left hand threads on one side, right hand on the other side. Here is picture of the part I am talking about.
coller.png

[Jeff Kleiner]

Speedway Motors or SPC suspension.

Jeff

[Bob Cowan]

Speedway Motors or SPC suspension.

Jeff

Exactly. https://www.spcalignment.com/race

[Hobby Racer]

Thanks!

[CraigS]

I usually get the number from SPC and then buy from Summit.

[Avalanche325]

I should have two from the older style A-arms. They may be shorter. I am sure someone here will know.

You are welcome to them if they will work for you.

[Hobby Racer]

I should have two from the older style A-arms. They may be shorter. I am sure someone here will know.

You are welcome to them if they will work for you.

As long as they are 5/8" 18 threads per inch (fine thread) they should work. I'll take them. If you could toss them in an small envelope / box and mail them to me I'll cover the shipping.

I'll PM you my address and you can reply back with the postage and I'll send you the $ via PayPal.

Thanks!

[Avalanche325]

5/8-18 thread
3 5/8" long
I'll get them in the mail tomorrow.

[Avalanche325]

They are on the way.