-
Senior Member
Shifter Issue
I’m finishing the interior of my roadster after driving it for a couple months. I just laid the carpet and decided I didn’t like how the dash vinyl came out so I’m redoing that also. Today I tried to put on the shifter boot and could not get the lever(on a TKO600) to not hit the chrome ring on the boot no matter how I arranged it. I wondering if anyone else had this problem and how they solved it.
I have thought about notching the shifter, buying a larger boot, or possibly buying a different shift lever. Any thoughts?
Mark4 - 331 Stroker - Fitech 600 -TKO600 - Moser 3.55
-
Senior Member
The manual suggested dilling another mount hole in the shifter, so it will stand more upright, is that an option?
Image-1.jpg
Last edited by GTBradley; 06-19-2019 at 06:52 PM.
Bradley
Build thread - Mk4, Coyote, IRS, Wilwood brakes, old-style soft top and accessories.
The distance between "finished" and finished is literally infinite.
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
Senior Member
Brewha,
Dont notch your shifter. Buy a tunnel top from FFMetal you can cut your own hole to position the shifter within the ring bounds.
https://www.ffmetal.com/
RickP