Fitting my rear splash guards, the large lower front guard is bent forward along the yellow line but looks like it should be straight. Anyone come across this? I'm just going to straighten it out.
20190726_185856.jpg
Visit our community sponsor
Fitting my rear splash guards, the large lower front guard is bent forward along the yellow line but looks like it should be straight. Anyone come across this? I'm just going to straighten it out.
20190726_185856.jpg
Last edited by beeman; 07-26-2019 at 06:01 PM.
MK3.1 2004 Mach 1 donor. ABS, PS, TC.
GTM #304 LPE 525hp LS3
2000 C5 Lingenfelter LS1@489hp
1999 Corvette FRC/Z06 track car
I think so. I had to rebend mine.
Cheers, Jeff
GTM 422, LS6, cam, heads, Mendeola trans
Thanks, Jeff.
Got both sides done with some mild persuasion.
MK3.1 2004 Mach 1 donor. ABS, PS, TC.
GTM #304 LPE 525hp LS3
2000 C5 Lingenfelter LS1@489hp
1999 Corvette FRC/Z06 track car
Yes...the Gen I and Gen II splash guards are all pretty much the same....and yes, I always have to straighten that front panel out and take as much of that bend out as I can. Not sure why they put that bend in there in the first place.....been that way since the very beginning.
Shane Vacek
VRaptor SpeedWorks, LLC
www.vraptorspeedworks.com
Turn-key GTM, SL-C & Ultima GTR Built to Your Specs!
Offering a full line of GTM Upgrades and Custom Parts