Forte's

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  1
Results 1 to 17 of 17

Thread: 818 parts - front end, fuel tank

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member
    Join Date
    Dec 2015
    Location
    Huntsville, AL
    Posts
    103
    Post Thanks / Like

    818 parts - front end, fuel tank

    Everything is gone. Thanks for looking.



    My 818 had a fire at the end of last year that completely burned the rear of the car. I decided to rebuild it without the body, kind of an exo-818. The front end body components were damaged but are repairable if anyone can use them. I have basically the entire front end available, body components, structural components, aluminum, etc.

    I also have the factory five fuel tank available that I did not use.

    I have an unused windshield frame and windshield glass.

    Fuel Tank
    The fuel tank has been sealed inside and out with KBS fuel tank sealant. Some additional baffling has been welded inside to help with fuel slosh. A fuel vent rollover check valve has also been installed. Includes fuel pump and fuel sending unit.
    I can ship the fuel tank.

    Windshield and frame
    Unused windshield frame and windshield glass.

    Fenders
    Left and right fenders including headlight assembly. The top of the fenders were burned in the fire and will need to be repaired. The gelcoat burned off. Also, the headlight covers will need to be replaced. Includes carbon fiber dive plates. Left side dive plate has a bubble from the heat. The fenders are structurally fine but the tops need some fiberglass work.

    Hood
    Similar to the fenders. Gelcoat burned off at the rear and will need to be repaired.

    Front end structural components
    Already assembled as pictured. Includes aluminum panels and grill.

    Front nose/grill
    No problems with the nose and includes brake cooling ducts

    Carbon fiber splitter - SOLD
    No problem from fire. Wear from installation and normal use. In good condition.

    These parts are really too big to ship so you will have to pick them up in North Alabama (Huntsville area).

    Make offer

    PM me with any questions

    Skip
    Attached Images Attached Images
    Last edited by lclevert; 10-01-2020 at 10:26 AM. Reason: Update

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Replica Parts

Visit our community sponsor