Looking for pics. The spindle angle looks like it is down.
Visit our community sponsor
Looking for pics. The spindle angle looks like it is down.
Last edited by Corsair343; 08-03-2019 at 12:37 PM.
The pin drive configuration aint pretty but here ya' go:
That has to create some wild camber changes and I hate to think about bump steer.
Jeff
I agree we're going to have to call on monday and figure something out. It looks like we might be the Guinea pigs for pin drive width.
I am not sure you really need to go with pin drive on the Gen 3 coupe, it is wider than the roadster. Most of us using the standard FFR wheels are adding 1 to 1.25 inch spacers on the back and there is room for a spacer on the front. There is room on the Coupe to add pin drive without the suspension comprise of the short "A" arms and still have a dished wheel. You will have to work out the details with FFR. I don't know of anyone who has done this yet.
David W
Mkll 4874 built in 2004
Gen 3 coupe #16 registered 2018 painted 2019
Thanks for the info we built the roadster pin drive width and just added it to list on the coupe.
Mk3 roadster picked up 4/07 titled 11/07 347 stroker t5z pin drive width independent rear.
Gen3 coupe picked up 7/19 347 stroker 3 link rear pin drive width knockoff wheels a/c heat.