I apologize if this has been covered before but I am wondering what this connector on the engine harness is for. Its located above the left side valve cover near the fuel inlet.20200303_180821.jpg
Thanks,
Doug
Visit our community sponsor
I apologize if this has been covered before but I am wondering what this connector on the engine harness is for. Its located above the left side valve cover near the fuel inlet.20200303_180821.jpg
Thanks,
Doug
MkIV Complete Kit #9423, Gen 3 Coyote, TKO-600, IRS Torsen 3.73, Wilwoods, DA Konis - Delivered 9/14/18
I don't remember off the top of my head (and too lazy to look it up right now...) but it's not used. Confirmed that with Ford Performance back when I installed my Gen 3. I tied it out of the way just in case. Hasn't been touched since.
Build 1: Mk3 Roadster #5125. Sold 11/08/2014. Build 2: Mk4 Roadster #7750. Sold 04/10/2017. Build Thread
Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020. Build Thread and Video. Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020. Build Thread and Video
Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023. Build Thread. Sold 11/9/2023.
Okay, Thanks Paul.
MkIV Complete Kit #9423, Gen 3 Coyote, TKO-600, IRS Torsen 3.73, Wilwoods, DA Konis - Delivered 9/14/18
Ambient Air Temp plug - not needed in the build