BluePrint Engines

Visit our community sponsor

Thanks Thanks:  1
Likes Likes:  1
Results 1 to 5 of 5

Thread: Led headlights for a mk 3

  1. #1
    Junior Member
    Join Date
    Oct 2018
    Posts
    10
    Post Thanks / Like

    Led headlights for a mk 3

    I have a mk 3 and would like to install led headlights with a halo ring. Can you tell me what ones will work

  2. #2
    Senior Member
    Join Date
    Feb 2011
    Location
    Edmonton Alberta
    Posts
    795
    Post Thanks / Like
    look at the 7 inch round ones for a Jeep, lots of them out there.
    David W
    Mkll 4874 built in 2004
    Gen 3 coupe #16 registered 2018 painted 2019

  3. Thanks Aircontroller thanked for this post
    Likes Aircontroller liked this post
  4. #3
    Member Purple Venom's Avatar
    Join Date
    Feb 2011
    Location
    St. Charles, MO
    Posts
    37
    Post Thanks / Like
    I bought the Chrome version of these, and have had them in for 2 years with no issues. The Anti Flicker harness was not needed - MoriMoto For $75, it's a great buy and they are on closeout. BTW - these have DRL's built in.

    When I was looking, I also ran across these threads/options:
    https://www.ffcars.com/forums/17-fac...installed.html

    These look more like a classic headlight - https://vintagecarleds.com/shop/7-in...-ultimate-kit/

    And the 7" Halo lights as used on Motorcycles - https://baggerbags.com/product/7-day...rcycle-harley/

    Jeep headlights work too. Good luck!

    Tim
    MKII, 460, QF 750 Carb, 3.55 Rear Gears, 447 RWHP & 460 RWTQ - 11.97 1/4 @ 119mph
    http://www.gatewaycobraclub.com
    https://www.facebook.com/GatewayCobraClub
    https://www.instagram.com/gatewaycobraclub

  5. #4
    Member
    Join Date
    Feb 2011
    Posts
    69
    Post Thanks / Like
    I used the same morimoto. Can’t best 75$ each. No anti flicker. I would highly recommend them.
    MM

  6. #5
    Senior Member
    Join Date
    Feb 2011
    Location
    Edmonton Alberta
    Posts
    795
    Post Thanks / Like
    I also have the Morimoto ones on my Gen 3 coupe, fit in the FFR light hardware same as the sealed beam light. Just add a power wire to the harness for the DRL's.
    David W
    Mkll 4874 built in 2004
    Gen 3 coupe #16 registered 2018 painted 2019

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Breeze

Visit our community sponsor