I am looking at 3 options for routing my rear brake hose.


1) forward down along the small cross brace towards the the drivers side
2) up over the top of the rear frame tube towards the drivers side
3) up in front of the rear frame tube towards the drivers side.

I went with the bracket and hard tubing on the 8.8 rear end based on the rear position of the calipers and the built in brackets on the rear end for the flex hoses from the calipers towards the differential.

My preference is 3 to keep it up out of the way of the UCA and driveshaft. Plus it will be easier to mount the bracket there.

Any thoughts?

IMG_0635.jpgIMG_0636.jpgIMG_0637.jpgIMG_0638.jpgIMG_0640.jpgIMG_0548.jpgIMG_0549.jpg