Very Cool Parts

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  1
Results 1 to 5 of 5

Thread: stainless steel brake hose

  1. #1
    Senior Member
    Join Date
    Mar 2011
    Location
    Falmouth, MA
    Posts
    752
    Post Thanks / Like

    Question stainless steel brake hose

    I have a 1994 cobra rear end with the calipers mounted on the rear of the axle. Does anyone have a source for stainless braided flex lines with the banjo fittings? Lots of sources have the front hoses but I can't find rear hoses.

  2. #2
    Seasoned Citizen NAZ's Avatar
    Join Date
    Feb 2016
    Location
    "The High Country", beautiful Flagstaff, AZ
    Posts
    2,443
    Post Thanks / Like
    Having trouble finding what you need in a ss braided hose with a banjo fitting? Consider purchasing banjo to -3AN adapters and you will open up a vast array of brake hoses. Manufacturers such as Earl's make them and for less than $20 you can outfit your rear brakes with adapters that will make selecting hoses easier.
    Dart Little M 406" SBC 800 HP N/A & 1,100 HP on nitrous, 2-spd Powerglide with trans brake, 6,000 RPM stall converter, narrowed Moser 88 3.90:1 spool with 35-spline gun-drilled axles & Torino bearings, custom parallel four-link, custom tube chassis & roll cage NHRA certified for 8.5-sec (only two FFR Hot Rods have this cert).

    33 Hot Rod Super Pro Drag Racer Build: 33 HR NHRA Cert Roll Cage Build

  3. #3
    Consummate Learner TxMike64's Avatar
    Join Date
    May 2017
    Location
    Kingsland, TX
    Posts
    403
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by cob427sc View Post
    I have a 1994 cobra rear end with the calipers mounted on the rear of the axle. Does anyone have a source for stainless braided flex lines with the banjo fittings? Lots of sources have the front hoses but I can't find rear hoses.
    I replied in the other thread, but look here: https://lmr.com/products/94-04-Musta...ake-Hoses#6229
    -- Mike -- TxMike64 -- @TxMGarage
    Gen1.5 Hot Rod '33 #1094 (Stage 1) - 302/AOD '15 IRS - Quad Built - Build Thread

  4. #4
    Senior Member
    Join Date
    Mar 2011
    Location
    Falmouth, MA
    Posts
    752
    Post Thanks / Like
    Thanks guys. I'll look into both options.

  5. #5
    Senior Member sethmark's Avatar
    Join Date
    Sep 2013
    Location
    Virginia International Raceway
    Posts
    752
    Post Thanks / Like
    I’m not the biggest fan of converting to -AN since it doubles the leak points, but it does basically work fine. If you need custom brake lines there are a ton of sources that will make it you whatever you want. Wickedtrucks.com in Florida has the machine and can make any length any color.
    33 Hot Rod #1133. LS/TKO600
    Delivered 6-17-19. Started work 7-3-19. First start 9-6-19. First drive 9-24-19
    Titled 2-28-20

    MkI.IV 2643k

  6. Likes HVACMAN liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Breeze

Visit our community sponsor