I'm having a hard time understanding what to do with this cable. First, my harness does not have the cable and connector as shown in the Ford instructions. Second, I don't see anything in the FFR instructions about connecting this? Please see attached picture of what my harness looks like. I have a 8 gage black wire with no end and another 8 gage cable with a crimped eyelet. Its not ground "E" as this is located farther down the main trunk. Any help would be much appreciated.
I also don't have harness X and Y. The Ford instructions seem to combine B and Y to form W.
It seems I just need to run one 8gauge cable from the PDB stud (C) to the megafuse and also place the 8 gauge black cable on the megafuse. Any advice would be appreciated.
PDB.JPG
pdb2.JPG