heater control valve mounting

[KenWilkinson]

I'm thinking of putting the heater control valve inside the AC unit behind the fan. I could use a molded 90 degree bypass hose and just drill a clearance in the bottom to let the rest of the hose
go to the bulkhead fitting.

Any reason why this is dumb?

[wallace18]

I'm thinking of putting the heater control valve inside the AC unit behind the fan. I could use a molded 90 degree bypass hose and just drill a clearance in the bottom to let the rest of the hose
go to the bulkhead fitting.

Any reason why this is dumb?

I mount mine inside all the time. No need for a 90. See post #72 of my 33 build. I cut the fan shroud. You can't see any of this once the dash is in place.

https://thefactoryfiveforum.com/show...33-build/page2

[Robodent]

I mounted mine on the inside as well.

[bnelson]

Me also. I just didn't like the clutter in the open engine bay. Had to get creative with the hoses where i put mine.

8-18-10 1.jpg