I can't find anywhere in the instructions where it explains how to intstall this piece. Anyone have any pictures of how they installed or can help?
Thanks ahead of time!
Side.PNG
Visit our community sponsor
I can't find anywhere in the instructions where it explains how to intstall this piece. Anyone have any pictures of how they installed or can help?
Thanks ahead of time!
Side.PNG
It covers the triangular area by the rear of the door. I make a different one. see post #222
https://thefactoryfiveforum.com/show...d-Thread/page6
Thanks for the response. If you would have used the FFR piece would you have had to cut it to match the angles\dimenstions? That is where I am stuck...a couple of the angles are off by 1/4" or more...or I am not fitting properly (although seems to only go in one way). Am tempted to make my own as well, but want to make sure I am fitting properly.
Last edited by mrbiglar; 11-03-2019 at 05:25 PM.
I tried fitting that piece in every way imaginable, like you have done, then made my own, like Wallace18.
818S/C : Chassis #25 with 06 WRX 2.5 turbo, ABS, cruise, PS, A/C, Apple CarPlay, rear camera, power windows & locks, leather & other complexities. Sold 10/19 with 5,800 miles.
Mk3 Roadster #6228 4.6L, T45, IRS, PS, PB, ABS, Cruise, Koni's, 17" Halibrands, red w/ silver - 9K miles then sold @ Barrett-Jackson Jan 2011 (got back cash spent).
Ok...That makes me feel better. Will plan to do the same.
Thanks for the advice!