Forte's

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: More questions about this kit pertaining to the exhaust cutout

  1. #1
    Member
    Join Date
    Feb 2018
    Posts
    56
    Post Thanks / Like

    More questions about this kit pertaining to the exhaust cutout

    Besides just downloading the manual oh, I'm looking over some things. One item auraria I should say is for the exhaust cutout. My engine requires a stepped header. Start starts at what you which primaries 10 by 15 to 17 and 1/2 in its steps up to 2 1/8". Yeah he gave me specifics on The collector size which has to be 4 inches and a certain length which also includes a side pipe length. not with that all said I'm having a feeling I might have to cut more into the fiberglass to get these pipes out. Am I correct to say that?

  2. #2
    Not a waxer Jeff Kleiner's Avatar
    Join Date
    Feb 2011
    Location
    Bloomington, Indiana
    Posts
    4,541
    Post Thanks / Like
    It is almost always necessary to do some fiberglass trimming when fitting the pipes.

    Jeff

  3. #3
    Member
    Join Date
    Feb 2018
    Posts
    56
    Post Thanks / Like
    Thanks Jeff for the insight

  4. #4
    Senior Member CraigS's Avatar
    Join Date
    Feb 2011
    Location
    Blacksburg, Va
    Posts
    3,073
    Post Thanks / Like
    Agreed. From what I have seen, FFR done cutouts are kind of a minimum to get you started. Makes sense since there are so many combinations of engine and exhaust that may end up in the car.
    FFR MkII, 408W, Tremec TKO 500, 2015 IRS, DA QA1s, Forte front bar, APE hardtop.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Brown County Customs

Visit our community sponsor