Very Cool Parts

Visit our community sponsor

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Panhard bar frame rubs pinion yoke

  1. #1
    Junior Member
    Join Date
    Feb 2018
    Posts
    2
    Post Thanks / Like

    Panhard bar frame rubs pinion yoke

    When my rear suspension unloads prior to full droop my pinion yoke hits my panhard bar frame. It rubs with the car on jacks and more importantly once in a while over larger bumps at highway speeds. Has anyone run into this and how was it corrected. Has anyone refabricated the panhard bar frame. I have a 3 link set up 8.8 rear and my pinion angle is properly set. Any help/input would be greatly appreciated.

  2. #2
    PLATNUM Supporting Member
    wallace18's Avatar
    Join Date
    Apr 2012
    Location
    Alachua, Florida
    Posts
    4,527
    Post Thanks / Like
    Check your ride height. Should be a minimum 4.5" frame to ground.

  3. #3
    Junior Member
    Join Date
    Feb 2018
    Posts
    2
    Post Thanks / Like
    My ride height is set at 5 frt and 5.5 rear and my tires are approx 25.5 tall all the way around. I should have mentioned before that I have QA1 shocks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Clever Turn Signal

Visit our community sponsor