-
Part Numbers for Commonly Upgraded Parts
I wanted to do something to try to help other newbies getting into this madness. I have made a spreadsheet of common items to upgrade over the standard F5 supplied parts. This is just a list of part numbers for items that people can get anywhere. I don't want this to be advertising to a specific vendor. Special thanks to Paul. Many of these part numbers come from his posts throughout the years.
Please check my part numbers. Also, make any recommendations for additional items and I can add them to my spreadsheet. Perhaps the moderators will make this a sticky?
Terry
Here is version 3 after some input by a few others. Keep the ideas coming guys!
Steering System
Tie Rods |
Moog ES2150RL |
Need to also get a 9/16"-18 SAE jamb nut, 1 for each tie rod |
Tie Rod Boots |
Energy Suspension 9-13101G |
For use with Moog Tie Rods |
Ball Joints option #1 |
Moog K772 |
Front upper |
Ball Joint Dust Boots |
Energy Suspension 5.13102G |
For use with Moog Ball Joints |
Ball Joints option #2 |
Howe Racing 22320S |
Front Upper. Upgrade over Moog? |
Ball Joints option #3 |
QA1 #1210-105 |
Front upper |
Power Steering Rack option #1 |
#6406; 3.0 turns lock to lock
#6439; 2.5 turns lock to lock
#64163 2.25 turns lock to lock |
Auto Zone, discontinued? |
If upgrading from manual steering, will need an additional steering rack to shaft adapter |
Power Steering Rack option #2 |
#101-0106, 101-0107 or 101-0108 |
O'Reilly's, bushings get replaced |
If upgrading from manual steering, will need an additional steering rack to shaft adapter |
|
|
|
Fuel System
Fuel Filler Cap |
Motorcraft FC-961, Ford XU5Z-9030-JA |
|
Fuel Tank Filler Neck Grommet |
Ford F4ZZ9072DA |
|
Fuel Pump Hanger Option #1 |
Quantum AN Fitting Fuel Pump Hanger HFP-AN50-H |
Return tube enlarged to 5/16" and with AN fittings |
Fuel Pump Hanger Option #2 |
Pro M Racing HANG |
3/8" Feed and Return Lines, AN fittings |
|
|
|
Other
Clutch Cable |
Ford Performance M-7553-C302 |
|
Clutch Cable |
Forte Hydraulic Setup |
Will need additional reservoir |
Accel Cable |
Lokar 42" cable |
Ford 302/351 motors |
Accel Cable |
Forte Mechanical Linkage |
Ford 302/351 motors |
Horn Button |
Uxcell a13040500ux0150 Stainless Steel Momentary Push Button Switch 22mm Flush Mount SPST |
Replaces cheap plastic button |
Exterior rear view mirrors option #1 |
Breeze Automotive |
Mounts to windshield frame / Available in black and chrome |
Exterior rear view mirrors option #2 |
Speedway Motors 92550745 4" |
Mounts to windshield frame |
|
|
|
Last edited by TMartinLVNV; 11-13-2019 at 10:59 AM.
MK IV Build #9659, 3 link, 17's, Forte 347, Sniper EFI, power steering, built for a freak sized person with 17" Kirkey Vintage seats, RT drop trunk, RT turn signal, lots of stuff from Breeze Automotive, Wilwood brakes, paint by Jeff Miller
-
Post Thanks / Like - 1 Thanks, 1 Likes