-
Part Numbers for Commonly Upgraded Parts
I wanted to do something to try to help other newbies getting into this madness. I have made a spreadsheet of common items to upgrade over the standard F5 supplied parts. This is just a list of part numbers for items that people can get anywhere. I don't want this to be advertising to a specific vendor. Special thanks to Paul. Many of these part numbers come from his posts throughout the years.
Please check my part numbers. Also, make any recommendations for additional items and I can add them to my spreadsheet. Perhaps the moderators will make this a sticky?
Terry
Here is version 3 after some input by a few others. Keep the ideas coming guys!
Steering System
Tie Rods |
Moog ES2150RL |
Need to also get a 9/16"-18 SAE jamb nut, 1 for each tie rod |
Tie Rod Boots |
Energy Suspension 9-13101G |
For use with Moog Tie Rods |
Ball Joints option #1 |
Moog K772 |
Front upper |
Ball Joint Dust Boots |
Energy Suspension 5.13102G |
For use with Moog Ball Joints |
Ball Joints option #2 |
Howe Racing 22320S |
Front Upper. Upgrade over Moog? |
Ball Joints option #3 |
QA1 #1210-105 |
Front upper |
Power Steering Rack option #1 |
#6406; 3.0 turns lock to lock
#6439; 2.5 turns lock to lock
#64163 2.25 turns lock to lock |
Auto Zone, discontinued? |
If upgrading from manual steering, will need an additional steering rack to shaft adapter |
Power Steering Rack option #2 |
#101-0106, 101-0107 or 101-0108 |
O'Reilly's, bushings get replaced |
If upgrading from manual steering, will need an additional steering rack to shaft adapter |
|
|
|
Fuel System
Fuel Filler Cap |
Motorcraft FC-961, Ford XU5Z-9030-JA |
|
Fuel Tank Filler Neck Grommet |
Ford F4ZZ9072DA |
|
Fuel Pump Hanger Option #1 |
Quantum AN Fitting Fuel Pump Hanger HFP-AN50-H |
Return tube enlarged to 5/16" and with AN fittings |
Fuel Pump Hanger Option #2 |
Pro M Racing HANG |
3/8" Feed and Return Lines, AN fittings |
|
|
|
Other
Clutch Cable |
Ford Performance M-7553-C302 |
|
Clutch Cable |
Forte Hydraulic Setup |
Will need additional reservoir |
Accel Cable |
Lokar 42" cable |
Ford 302/351 motors |
Accel Cable |
Forte Mechanical Linkage |
Ford 302/351 motors |
Horn Button |
Uxcell a13040500ux0150 Stainless Steel Momentary Push Button Switch 22mm Flush Mount SPST |
Replaces cheap plastic button |
Exterior rear view mirrors option #1 |
Breeze Automotive |
Mounts to windshield frame / Available in black and chrome |
Exterior rear view mirrors option #2 |
Speedway Motors 92550745 4" |
Mounts to windshield frame |
|
|
|
Last edited by TMartinLVNV; 11-13-2019 at 10:59 AM.
MK IV Build #9659, 3 link, 17's, Forte 347, Sniper EFI, power steering, built for a freak sized person with 17" Kirkey Vintage seats, RT drop trunk, RT turn signal, lots of stuff from Breeze Automotive, Wilwood brakes, paint by Jeff Miller
-
Post Thanks / Like - 1 Thanks, 1 Likes
-
The spreadsheet formatting does not transfer to here well. I will work on making it look prettier in a table format later.
MK IV Build #9659, 3 link, 17's, Forte 347, Sniper EFI, power steering, built for a freak sized person with 17" Kirkey Vintage seats, RT drop trunk, RT turn signal, lots of stuff from Breeze Automotive, Wilwood brakes, paint by Jeff Miller
-
25th Anniversary #9772
Originally Posted by
TMartinLVNV
I wanted to do something to try to help other newbies getting into this madness. I have made a spreadsheet of common items to upgrade over the standard F5 supplied parts. This is just a list of part numbers for items that people can get anywhere. I don't want this to be advertising to a specific vendor. Special thanks to Paul. Many of these part numbers come from his posts throughout the years.
Please check my part numbers. Also, make any recommendations for additional items and I can add them to my spreadsheet. Perhaps the moderators will make this a sticky?
Terry
Tie Rods,
Moog ES2150RL $20, Need to also get a
9/16"-18 SAE jamb nut $10 for 6 , 1 for each tie rod
Fuel Tank Filler Neck Grommet,
Ford F4ZZ9072DA $18
Clutch Cable,
Ford Performance M-7553-C302 $53
Clutch Cable, Hydraulic Setup, Will need additional reservoir
Accel Cable, Lokar 42" cable or Mechanical Linkage, Ford 302/351 motors
Tie Rod Boots,
Energy Suspension 9-13101G $4, For use with Moog Tie Rods
Ball Joints,
Moog K772 $14
Ball Joint Dust Boots,
Energy Suspension 5.13102G $7, For use with Moog Ball Joints
Ball Joints,
Howe Racing 22320S $83, Upgrade over Moog?
nice list! added some quick links to ease everyone's search
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Senior Member
Nice. I would make a note re; the K772s, boots and upgrades, that they are front upper BJs. Also add that QA1 makes a similar BJ #1210-105 from here
https://www.qa1.net/suspension/ball-...le-ball-joints
Also
- expanding foam tape from McMaster is # 7650A14
- power steering racks from Autozone
#6406; 3.0 turns lock to lock
#6439; 2.5 turns lock to lock
#64163 2.25 turns lock to lock
FFR MkII, 408W, Tremec TKO 500, 2015 IRS, DA QA1s, Forte front bar, APE hardtop.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Not a specific part number, but if you hate the plastic horn button, one like this is a good alternative:
Uxcell a13040500ux0150 Stainless Steel Momentary Push Button Switch 22mm Flush Mount SPST https://www.amazon.com/dp/B00D0XK5W2..._m3wYDbDYGVEER
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Originally Posted by
CraigS
Nice. I would make a note re; the K772s, boots and upgrades, that they are front upper BJs. Also add that QA1 makes a similar BJ #1210-105 from here
https://www.qa1.net/suspension/ball-...le-ball-joints
Also
- expanding foam tape from McMaster is # 7650A14
- power steering racks from Autozone
#6406; 3.0 turns lock to lock
#6439; 2.5 turns lock to lock
#64163 2.25 turns lock to lock
Craig, are any additional parts needed if upgrading from manual steering rack (besides power steering pump and hoses)?
MK IV Build #9659, 3 link, 17's, Forte 347, Sniper EFI, power steering, built for a freak sized person with 17" Kirkey Vintage seats, RT drop trunk, RT turn signal, lots of stuff from Breeze Automotive, Wilwood brakes, paint by Jeff Miller
-
Not a waxer
Originally Posted by
TMartinLVNV
Craig, are any additional parts needed if upgrading from manual steering rack (besides power steering pump and hoses)?
You'll need the steering shaft to rack adapter.
Autozone no longer stocks the remanufactured #6406 Fox rack. O'Reilly does; #101-0106, 101-0107 or 101-0108 with the difference being the mount bushings which is a moot point since for our use they get replaced anyway.
Jeff
-
Senior Member
Well that sucks. Jeff, glad you found the O'Reilly source because the AZ racks start at around $350 and go up from there. Jeff, are the three O'Reilly racks the same 3.0 turns or do they vary like AZ used to?
FFR MkII, 408W, Tremec TKO 500, 2015 IRS, DA QA1s, Forte front bar, APE hardtop.
-
Not a waxer
Craig,
The online specs show that they are all the same 3.0 turn ratio but with different mounting bushings and one being the Ford produced rack and the other TRW (both were OEM and they interchange). They also have a remanufactured quick ratio 2.5 turn rack. #101-0111.
NAPA also offers remanufactured racks in both ratios but their core charge is outlandish so if you don't have an exchange you'd wind up paying about 80% of just buying new.
Jeff
-
Well Used Member
My FFR gas cap (Stant I think) never worked in the LeMans housing. I used the Ford OEM equivalent, and it works just like it should now. Motorcraft FC-961, Ford XU5Z-9030-JA
Last edited by boat737; 11-12-2019 at 12:49 PM.
If Brute Force doesn't work, you're not using enough of it.
Basic Stuff: MK4 Complete Kit #8439, Wilwood's, 17" Halibrands. Extra Stuff: Stainless brake and fuel lines, Breeze cooling, Battery mount, SS Roll Bar. Old Fart Stuff: Heater, Seat Heaters, Footbox Fresh Air, Stereo, Keyless ignition, Power Steering, Hyd Clutch.
Young & Dumb Stuff: 427w Dart, TKO600, 3 link Moser M9/Ford 9", 3.5:1, Eaton TruTrac Posi. Graduation Thread