Coyote Oil Pick up Torques

[4.6 litre]

Are these the correct Coyote oil pick up torques?:

Oil pump pick up tube to pump 89 + 45 deg. lb.-ins (2-10mm screws)
Pick up tube strap to main cap 19 lb.-ins
Pick up tube spacer to main cap 19lb.-ins

Thanks,

Here is the data from Ford Racing Performance M-6007-A50NA 5.0L Engine (page 8 of 11)

Pick up tube strap to main cap 25Nm 19Lbs-in
Pick up tube spacer to main cap 25Nm 19Lbs-in

25Nm is equal to 221Lbs-in

Is this a typo in the FPR data or am I missing something.

Thanks

[Hacksaw84]

This is what I have used.

mustang-50-coyote-motor-torque-specs_71be7a75.jpg

[Railroad]

Are these the correct Coyote oil pick up torques?:

Oil pump pick up tube to pump 89 + 45 deg. lb.-ins (2-10mm screws)
Pick up tube strap to main cap 19 lb.-ins
Pick up tube spacer to main cap 19lb.-ins

Thanks,

Here is the data from Ford Racing Performance M-6007-A50NA 5.0L Engine (page 8 of 11)

Pick up tube strap to main cap 25Nm 19Lbs-in
Pick up tube spacer to main cap 25Nm 19Lbs-in

25Nm is equal to 221Lbs-in

Is this a typo in the FPR data or am I missing something.

Thanks

I think the 19 in lbs SHOULD READ 19 FT LBS.
If you multiply the 19 X 12 it is 228, which is about what they are showing for equivalent to 25 Nmeters 221 in lbs.

If you have not removed the fastners currently on the pickup tube, use your tq wrench and see what they break loose at.