Show Me Your Door Pulls

[ManheimAutoAuction]

Looking for different ideas and options for pulling the doors closed.

Show me your set up or ideas from leather straps or a real handle.

Thank you!!!

[Jim1855]

I always used the body. Doesn't break, doesn't need additional installation, nothing extra hanging inside the door. Just a few fingerprints that are going to get there anyway.

But then I may not be the best guide, certainly not a beacon of shining light, I used Sharpies to touch-up stone chips, lots of Sharpies.

Jim

[KenWilkinson]

Looking for different ideas and options for pulling the doors closed.

Show me your set up or ideas from leather straps or a real handle.

Thank you!!!

rope pull2 1.jpeg

rope 2.jpeg

rope 3.jpeg

rope 4.jpeg

rope 5.jpg

Opps, last one is a dog top sorry

[ManheimAutoAuction]

Thank you. I have been looking at those you posted as well as these.

DRP1001SS-B-2T.jpg

And these.
910-122_2.jpg
910-122_1.jpg

[edwardb]

Are you going to install door cards? If not, the big hole in the Coupe door with the frame behind it can be grabbed to pull the door shut. On mine I did both kind of. Made door cards but left the area where the door openings are open and put storage bins behind. Then braced the lower edge so I could use it to pull the doors closed. Works great. Pictures and more details in my build thread.

[John Dol]

That first pull would go well with the door limiting strap as it has the exact hardware.

HTH

John