assembled the Wilwood hats & rotors with safety wire...
IMG_9543.jpg IMG_9544.jpg IMG_9545.jpg IMG_9557.jpg
Visit our community sponsor
assembled the Wilwood hats & rotors with safety wire...
IMG_9543.jpg IMG_9544.jpg IMG_9545.jpg IMG_9557.jpg
You might want to revisit your lockwire spec. The lockwire should be tight enough to NOT allow a bolt to rotate. The bolt to the left could turn/loosen because the wire "between" the bolts is too losses.
Good luck in your build! Never stop asking questions. There is a wealth of information here.
Last edited by Ducky2009; 02-24-2020 at 12:37 PM.
MK4 Build #9035 Delivered 2/17/17, First Start & Go-Kart 6/2/17, Licensed 9/1/17
Paint - Lightning Blue Metallic, No Hood Scoop, No Stripes
Gen 2 Coyote Engine & TKO-600. Solid Axle, 8.8-3.55, Power Steering, Power Brakes, Dual Roll Bars
Heater and Glove Box, Drop Trunk, Wipers, Radio, FFR Vintage Gauges, Custom Dash
Build Thread: http://thefactoryfiveforum.com/showt...MK4-Build-9035