Visit our community sponsor
Thanks:
0
Likes:
0
-
Cowl Latch concern.
Hi Everyone.
So i installed the latch on the front cowl. I followed the instructions as per the FF manual. Something just isn't right. When the latch is closed, it doesn't look finished at all.
definitely doesn't look like others i have seen on this forum.
I have attached the pictures. of both sides. Any feedback, will greatly appreciated. All the pics are with the latches in the closed position.
frustrated
Nelson
latch 1.jpg
latch 2.jpg
latch 3.jpg
latch 4.jpg
latch 5.jpg
latch 6.jpg
-
Senior Member
Looks like you missed the part in the manual about flattening that top mounting bracket. "Use a vise to flatten the mounting ears on each nose latch," and there's a picture. It's page 392 in my manual. Might be different page in yours.
Last edited by edwardb; 03-27-2020 at 05:40 PM.
Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
Build 2: Mk4 Roadster #7750. Sold 04/10/2017.
Build Thread
Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020.
Build Thread and
Video.
Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020.
Build Thread and
Video
Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023.
Build Thread. Sold 11/9/2023.
-
Originally Posted by
edwardb
Looks like you missed the part in the manual about flattening that top mounting bracket. "Use a vise to flatten the mounting ears on each nose latch," and there's a picture. It's page 392 in my manual. Might be different page in yours.
.
Thankyou!!!!!
I really need to step back and re read the instructs a few times
-
Well i fixed it. so so much better.
thanks again Paul. I just have an extra couple of holes to fill during body work lolol
Hopefully my mistake saves another from doing the same.
latch 8.jpg
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor