-
PLATNUM Supporting Member
Truck interior flock steps.
I have been asked to do a thread on how I did the inside of my 35 cab with flock. Here is where I bought it. And a video on how to do it I watched.
http://www.flockit.com
https://www.youtube.com/watch?v=9CKsHDOhAZQ
https://thefactoryfiveforum.com/show...d-Pickup/page6
We cleaned the inside of the cab and coated it with Lizard Skin sound deadener. This gave us a nice base as well as gave some sound control as well. Once the Lizard Skin was cured we flipped the cab upside down. I had my wife help me as we were not sure how much time we had between putting the glue down and getting the flock in place. I used both the hand held flocking tool as well as the air powered unit. Once we had all the area we wanted taped off and used 1" HF brushes to apply the glue, I applied the flock. We did this when it was cold so I covered the cab with blankets and put a heater inside to cure everything overnight. Once all was cured we used a soft brush accessory on my shop vacuum to get rid of excess flock. It is very durable and comes in different colors . More pics and explanation in my 35 build thread starting on post #241. I bought a 5LB bag of flock and a gallon of glue as well as the applicators. I used about 1/2 to 2/3 of the products. I suggest you try it on a scrap piece of wood or fiberglass to get the hang of it first. Here is some photos.
B20695B4-13F3-455E-8035-152C16F73C50_1_105_c.jpeg66AEED66-1E9F-486D-9530-271C2B571223_1_105_c.jpegC996B737-413B-40D7-BB1B-C27C3332B630_1_105_c.jpegF829E1F5-55C5-4422-BA12-6D478C03874C_1_105_c.jpeg322EA0D8-DE2A-4122-A1C7-087E414002EA_1_105_c.jpeg
16+ FFR kits and counting!
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Thanks for your service to the Forum.
Ralph