Visit our community sponsor
Thanks:
0
Likes:
0
-
Senior Member
Coyote Hot Rod steering issues?
It appears as though the 33 Hot Rods with Coyote engines require a lot of universal joints and shafts in order to connect the steering column to the steering rack.
Does this cause any handling, or drivability issues?
Obviously, we have to pay attention to u-joint phasing. It seems like it would be difficult to get slop or play out of the steering.
If you were doing it over again ....?
Thanks for any input.
-
Senior Member
I have not had any so far, knock on wood, just need to make sure everything is free moving and the set screws properly seated.
20200621_194156.jpg 20200327_151650.jpg
Black & Copper #1028 ("The Mistress" according to my wife!
)
Brought home: Nov. 2017, GoKart: May 2018, will be Plated & on the Road April 2020
Andreas
-
Originally Posted by
Lickity-Split
It appears as though the 33 Hot Rods with Coyote engines require a lot of universal joints and shafts in order to connect the steering column to the steering rack.
Does this cause any handling, or drivability issues?
Obviously, we have to pay attention to u-joint phasing. It seems like it would be difficult to get slop or play out of the steering.
If you were doing it over again ....?
Thanks for any input.
Pretty sure factory five offers "Long tube" headers that eliminated the need for all those universal Joints I would call and ask.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor