Curious if anyone has ever had an issue with the -3 to banjo braided brake lines. I've been fighting a super spongy brake pedal for years and I have isolated the problem to either the calipers (powerstop pbr style nothing fancy) or these braided lines. If I cap off the -3 fitting at the frame on both sides of front, I get a rock hard pedal. Reconnecting either or both lines brings on the spongy pedal. I can't think of a way to cap the banjo fitting so I'm kinda stuck. This is not rocket science and before you ask, yes, the bleeders are up. I don't think it's a caliper problem because these Powerstop units were installed to replace the FFR supplied calipers. That's why I suspect hoses but I see no leakage, no ballooning, and no fluid loss. All my friends say good luck but offer no new suggestions. Help please..
Tom