Visit our community sponsor
They go in the rear inside corners of the interior. The rounded part is the top. The small round cut-out goes around the roll bar. They're shown in the manual toward the end because they can't be riveted in until the cab is installed for good. So they're separate from all the other aluminum panel installation instructions.
Build 1: Mk3 Roadster #5125. Sold 11/08/2014. Build 2: Mk4 Roadster #7750. Sold 04/10/2017. Build Thread
Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020. Build Thread and Video. Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020. Build Thread and Video
Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023. Build Thread. Sold 11/9/2023.
Thanks, I thought I had tried them everywhere.
Thanks,they must have changed the manual. I looked at all photos as well as the digital manual and can not see them.
This is my first build and these 2 (Left &right cockpit rear inside covers) still have me stumped. Does any one have a picture of them installed?
Thanks
Build 1: Mk3 Roadster #5125. Sold 11/08/2014. Build 2: Mk4 Roadster #7750. Sold 04/10/2017. Build Thread
Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020. Build Thread and Video. Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020. Build Thread and Video
Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023. Build Thread. Sold 11/9/2023.
Edward B
Thank you!! I thought I tried every way except the way your picture shows.
Thanks for the help.
Cam