Boig Motorsports

Visit our community sponsor

Thanks Thanks:  2
Likes Likes:  1
Results 1 to 4 of 4

Thread: 818 Fuel Pump question

  1. #1
    Mark Eaton's Avatar
    Join Date
    Apr 2017
    Location
    Medford, Oregon
    Posts
    756
    Post Thanks / Like

    818 Fuel Pump question

    I have a 07 Impreza non turbo donor and my fuel pump is shown





    This is different than the one in the manual which I think is from WRX turbo charged. Mine has two send and return tubes on the top of the mounting plate instead of three as shown in the manual. I think mine are fuel pump out and jet pump in?

    My questions are #1. do I need to come up with my own vent system?

    And #2. Do I just leave that little plastic venturi pump thingy in place instead of removing it as in the manual?

    Thanks
    MK4 #9130 , complete kit, arrived 8/10/2017, Street Legal 2/14/2020.
    DART SHP 347, EFI, TKO600, IRS
    http://thefactoryfiveforum.com/showt...n-Build-Thread

  2. #2
    PLATNUM Supporting Member
    wallace18's Avatar
    Join Date
    Apr 2012
    Location
    Trenton, Florida
    Posts
    5,382
    Post Thanks / Like
    One is out the other return. Your vent will be on secondary fuel level sensor.

    9254331A-272B-4E10-93B1-81522F3F5C0B.png
    16+ FFR kits and counting!

  3. Thanks Mark Eaton thanked for this post
    Likes J R Jones liked this post
  4. #3
    Senior Member Scott Meyer's Avatar
    Join Date
    Feb 2011
    Location
    Palm Harbor, FL
    Posts
    203
    Post Thanks / Like
    Mark,

    Yes, you need to come up with your own vent. We have the exact same year donor, and after a few emails with F5, that was their reply. We left the pump as it was…IIRC.

    I think we did a AN5, to a 3/8” vent line to a home made charcoal canister. It’s in our build thread from early 2021:

    https://thefactoryfiveforum.com/show...l=1#post444735
    Last edited by Scott Meyer; 11-28-2021 at 01:38 PM.
    818 "S"pyder delivered 11/27/20, using 2007 Impreza 2.5l NA donor. Work mostly being done by my son Liam...body work and paint being done by dad (that's me)
    MK3.1 #6583RD, built from 2008-2019, sold 11/2011

  5. Thanks Mark Eaton thanked for this post
  6. #4
    Senior Member
    Join Date
    Apr 2020
    Posts
    200
    Post Thanks / Like
    Yours is like mine. Unlike the turbo models described in the manual, the naturally aspirated donors include the fuel pressure regulator and fuel filter inside the fuel tank, so there is only 1 tube for fuel going to the engine and no return. The other tube pulls fuel from the other side of the saddle tank. It can be cut off as described in the manual and used as a (rather small) vent.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Martin's Dent and Collision Shop

Visit our community sponsor