-
FFR Maven
The Daytona Wheel and Tire Repository
I have compiled some wheel and tire data specific to the FFR Gen3 Type 65 Coupe/Daytona. Now sharing it here for the greater FFR community.
1. If you are not on this list, but have data you'd like to add, please PM me or post here.
2. If you see any errors, please let me know.
3. Conditionally formatted columns are colored by low-high values. DO NOT interpret them as green = good, red = bad. That is not how they work.
4. Clearance/rubbing is dependent on alignment, body fitment, specific tire model, etc. Many of these are driving cars, so expect minimal/no rubbing issues, but some are still under construction (see notes column).
5. Offset total = wheel offset plus any spacer thickness, if present.
6. Backspace and Frontspace are both calculated with spacer included, if present. They also include the wheel flanges (0.5" nominal per flange, so an 18x10" wheel is actually 11" wide including flanges).
Last edited by Logan; 01-15-2023 at 01:13 PM.
Reason: Updated: 2023.01.15
-
Post Thanks / Like - 5 Thanks, 9 Likes