I would appreciate some help from you folks
My donor is an '06 STI. After trying to understand why mine looks different, I realized the stock FPR is under the intake manifold, not out by the fuel rail connections as on later models.
My plan has been to keep things stock, though I am using a Boyd tank I got with the kit. So here's what I want to do. Please let me know what I'm missing, or areas to look out for
1. Will be adding a simple aftermarket FPR to step down the FP in the tank. Let the stock FPR do its thing
2. Can I use the stock FP controller? I don't know really anything about this, just have seen some discussion. Will upgrade if needed
3. I've seen folks leave out the dampers in the fuel inlet and return lines; is this okay? Some of the Sube guys says it leads to noise and early damage to injectors? I'm trying to do all steel braided lines and fittings so adding the dampers might be ugly but will if needed.

Thanks for any advice or why's and wherefore's..

fuel hose 1.jpgfuel sys 1.jpg