Hi all - three questions for you all re: reservoir plumbing. I decided to go with the jamar triple reservoir. I fabricated a mount bracket to mount it to the 3/4 upper front frame bar just outside the pedal box as many others have done. Three quick questions:

1.). Since I’m using a hydraulic clutch is there any reason I can’t use the right pre fab hole in the pedal box front that the clutch cable would normally run through to run the 3 reservoir hoses? See pic - I temporarily ran the 3 rubber hoses through the hole I am referring to.

2.) what’s best distance from the pedal box to mount this reservoir?

3.) I have seen some SS braided hoses for the reservoir to master plumbing. I want to go this route. Any suggesting on SS hoses for the jamar connection to my wilwood masters (brakes and hydraulic clutch)?4C8CC52F-5AA1-44E0-855E-DEB9B72D79DA.jpg

Pic attached for some reference. Thanks again! Mike