Hi,
I have a stock 5.0L block, and GT40P heads. What do I need to get to 300-350HP. Intake(needs to be low, I have a coupe), cam, rockers etc.
I'm planning to use the FAST EZ EFI kit, a T5 trans and 3.73 rear gears.
Thanks,
John
Visit our community sponsor
Hi,
I have a stock 5.0L block, and GT40P heads. What do I need to get to 300-350HP. Intake(needs to be low, I have a coupe), cam, rockers etc.
I'm planning to use the FAST EZ EFI kit, a T5 trans and 3.73 rear gears.
Thanks,
John
Finished the "My Coupe, my way" project.
http://s956.photobucket.com/albums/ae46/jdcoupe1969/
Coupe #386,17" Team III 245 FR 315 RR, 3-link, T5, 4 wheel disk, power brakes/steering. Sniper EFI
First start Sept. 18 2013 First go kart Sept 19 2013
A Ford "e303" or "b303" cam with 1.7 rockers and 32lb injectors with a tune should get yuou there..STeven
FFR Daytona Type 65 Coupe
67 427 Cobra
57' Belair
72 Pinto Wagon ,306" 1/4 miler
34 5 window coupe Ford
2003 Mustang GT
99' ZX9
85 Goldwing
All toys still in the Scuderia!
Every Saint has a past..................every sinner a future
Don't take yourself so seriously........no one else does.
You never see a motorcycle parked outside a Psychiatrists office.
Old story but good info... bottom line.. your got to work your butt off to get over 300hp
http://www.dfwstangs.net/forums/arch...p/t-25409.html
Thanks,
Al Adkins
Certified "Kool Aid" drinker
FFR 7216 MK 4 Non Donor Street Legal 06/13/11 at 4:30 pm! Graduation 1/1/2012
3 Link Ford Racing 3.73 8.8 Posi with Yukon Axles.
4 wheel discs Brembo rotors and Hawk HP plus pads.
Ford Racing 302 340 HP T5Z 5 Speed Stainless Headers and Side Pipes.
Holley 670 Street Avenger on Edelbrock Performer RPM. MSD Pro-Billet Distributor
Delivered 04/11/10 7:30 pm Roller 05/08/10 Engine installed 08/07/10 First Start 02/19/11