So after some more emails on Monday I had the 8 bolts by the next weekend and put it all together.
DIFF IN.jpgARMS ON.jpgAXLE IN.jpgSPINDLE ON.jpg

One other thing is the ears on the A-Arms are not quite open enough and needed to be spread a little, the easiest way was to get a section of 1/2-13 all thread and some nuts. Once the nuts and all thread were put in place it took just a little to open everything up to fit.

SPREAD TOOL.jpg

I also got my filler neck grommet I ordered. After comparing it with what came in the kit I will say GO FIND THE OEM PART. The consistency of the rubber is vastly different. The FFR supplied one is a lot softer and is physically smaller. I can see that it might not seal well and lead to fuel leaks a lot of other builders have experienced.

FUEL 1.jpgFUEL 2.jpgFUEL 3.jpg