Rebostar MK4 Build in Gaston Oregon

[Rebostar]

After the paint dried it was time for assembly. The housing comes bare and has to be built up. The good news is the axles came with the bearings and locks installed. Once the center section was installed the axles and brakes needed to be installed. As mentioned earlier none of the attach hardware is useable with the aftermarket control arms so I'm using all quality grade #8 and had to drill out the frame mounts to accomadate the larger hardware.

DSC02945.JPGDSC02946.JPGDSC02947.JPGDSC02948.JPGDSC02949.JPG